| This is the radio controlled, electric powered, Multiplex Mini Mag Park Flyer Trainer Airplane.
For Beginning Modeler or Fliers.
Wings: Molded Elapor foam (one-piece)
Motor: Permax 400, 6V - MPU-G3345
Prop: Paul Gunther #203 5x4.5 (125mmx110mm)
Radio Compartment: Accessible under wing
Landing Gear: Prebent fixed wire 0.16" (4mm) diameter,
Can be fitted with optional Float Set MPU-Q7369 (not included)
Float Set requires brushless motor for water take-offs
Wheels: Two foam 2" (54mm) diameter
Aileron Control: Can be added for enhanced flight characteristics
Cowl: Elapor foam
Hardware: Complete set included
featuring .031" diameter pushrods
Decals: Peel and stick application with yellow, orange and red
accents and black windows
Building Time: Ready to fly in several hours
INCLUDES: Pre-molded wings, fuselage and tail assemblies, pushrods, all
hardware, pre-bent 0.16" (4mm) wire landing gear, two 2" (54mm)
wheels, speed 400 motor, electric motor mount, 5x4.5 prop, decal
sheet and illustrated instructions.
Specificatons
: Wingspan: 39.75" (1010mm)
Weight: 20.5oz (581g)
Length: 32.25" (819mm)
Airfoil: Flat bottom high-wing placement
Center of Gravity: 2.6" (67mm) back from the leading edge of the
wing at the fuselage side
Control Throws-
Elevator: up and down 7/16" (11mm)
Rudder: right and left 3/8" (10mm)
Ailerons: up 5/16" (7mm), down 1/8" (3mm)
*****YOU WILL NEED*****
Radio: 3 channel (4 channels if building with ailerons)
- FUTJ3
Servos: 2-4 nano size servos (1 rudder, 1 elevator, 2 for ailerons)
Y-Harness: 1 required if using ailerons - HCAM2500
Battery: 7 cell AA size battery or 2-3 cell LiPO - GPMP0822
Speed Control: GPMM2025 (will require soldering motor leads and 3.5mm
male bullet connectors to the motor - WSDC1010 and GPMM3112)
Misc. Items: Building and field equipment
|
