| This is a Ready-To-Fly, Radio Controlled, Electric Powered, Hand Launch Aero Cruiser Airplane Set with Speed Control, NiMH Battery and Motor.
FEATURES:
Fully assembled and ready for flight in only a few quick steps.
Includes everything needed to assemble and fly the airplane except the radio system.
Flight battery is a rechargeable NiMH (Nickel-Metal Hydride) pack that allows for longer flight times.
Airplane looks similar to a Piper Cub and is constructed of foam.
Color is yellow with a dark blue and red stripe scheme on the fuselage and rear stabilizers. Decals of the stripe scheme, black call numbers and the Aero Cruiser name are pre-applied.
Specifications
Wingspan: 37.5" (952.5mm)
Wing Area: 213 sq in (13.7 sq dm)
Flying Weight: 1.4 lb (650g)
Wing Loading: 15.3 oz/sq ft (47 g/sq dm)
Fuselage Length: 28.5" (723.9mm)
Center of Gravity: between 1-7/8" and 2-1/4" back from the leading edge of the wing.
Elevator Adjustments: 3/8" (9.5mm) up and down
Rudder Adjustments: 1/2" (13mm) right and left
Motor: 380 size
On-Board Battery: 8.4 volt AA size 7 cell side by side hump pack-4 cells on bottom, 3 cells on top, 1300 mAh with a unique Hobbico connector.
*****YOU WILL NEED*****
Radio: 3-4 channel w/2 standard or mini servos.
(8) AA size alkaline batteries for the transmitter.
Charging the included Nickel-Metal Hydride battery with wall charger.
Final assemblies of attaching wing, tail sections, propeller, struts, landing gear and installing the battery pack.
Installing the radio system.
Checking trims on the control surfaces.
|
