| 1200Kv w/4mm HS
E-flite’s latest Park 370 is a brushless outrunner motor that features a 4mm hollow shaft, ideal for use with variable pitch propellers. It’s perfectly designed for electric models equipped with variable-pitch propeller systems, such as the E-flite® ShowStopper VPP system. However, you don’t need a VPP to use this motor—it’s an excellent motor for small 3D airplanes that weigh 7–14 ounces. A motor mount, prop adapter and all hardware are included.
Features
Ideal for models requiring up to 120 watts of power
Optimized windings for 3D performance
High-torque direct-drive alternative to inrunner brushless motors
Includes mount, prop adapters, and mounting hardware
4mm hollow shaft is easily reversed for alternative motor installations
Excellent motor for small 3D airplanes 7 oz - 14 oz (200 g - 400 g)
Extremely lightweight - just 1.6 ounces
Ideal for variable pitch props such as the E-flite Showstopper Variable Pitch Prop System
External rotor design for better cooling
High-quality construction with ball bearings
Specifications
Type: Brushless Outrunner
Size: Park 370
Bearings or Bushings: Bearings
Recommended Prop Range: 8x3.8-10x4.7 or Variable Pitch Systems
Voltage: 7.2-12V
RPM/Volt (Kv): 1200
Resistance (Ri): .18 ohms
Idle Current (Io): .60A
Continuous Current: 10A
Maximum Burst Current: 12A (15 sec)
Cells: 6–10 Ni-MH/Ni-Cd or 2–3S Li-Po
Speed Control: 12-20A Brushless
Weight: 45 g (1.6 oz)
Overall Diameter: 28mm (1.10 in)
Shaft Diameter: 4mm (.16 in) hollow
Overall Length: 25mm (1.00 in)
******YOU WILL NEED*****
12-20A Brushless ESC
2-3S Li-Po or 6-10 NiCd/NiMH
8x3.8-10x4.7 Slow Flyer Prop
Variable Pitch Prop option
|
