| If anybody knows what precision feels like, 3-time World Champion and 2-time US Champion Quique Somenzini certainly does. And he has poured all this experience into the design of the Brio 10—a 10-size replica that even flies the same as the F3A plane he used to win the 2005 US Nats.
At the heart of its performance is a low aspect ratio wing that moves the center of lift closer to the fuselage.
The result is an electric pattern plane with outstanding roll rates and a locked-in feel that will give you the confidence to fly artistic aerobatics with absolute precision.
Here are just a few of the many features that you'll find when you buy a Brio 10 from E-flite:
Factory Painted Fiberglass Parts and Aluminum Landing Gear
The Brio 10 comes with expertly painted fiberglass parts such as the cowl and wheel pants. Tough, lightweight aluminum landing gear is also included.
Quality Construction and Large Control Surfaces
The Brio 10 is built from the best balsa and light-ply materials, then covered in genuine Hangar 9® UltraCote®. Its generously proportioned control surfaces give it extraordinary responsiveness.
Magnetic Canopy Hatch
The Brio 10’s handy magnetic canopy hatch stays securely in place without screws or tape.
Carbon Fiber Stiffeners
Part of the Brio 10’s outstanding precision comes from carbon fiber stiffeners on the elevator that virtually eliminate flex.
Whether you desire aggressive 3D or high-speed F3A-type maneuvers, the Brio 10 will fly exactly where it’s pointed, flight after flight, without needing constant trim adjustments.
Features
Designed for artistic aerobatics—a blend of 3D and precision aerobatics
Fuselage shape provides excellent side lift for knife edge flight,br>
Wide body fuselage design provides better downline speed management
Low aspect ratio wing moves the center of lift closer to the fuselage
Outstanding aileron authority for blazing-fast roll rates
Superb, locked-in flight characteristics—flies exactly where you point it
Lightweight balsa and light ply construction
Includes painted fiberglass cowl, aluminum landing gear and painted fiberglass wheel pants
Specifications
Wing Span: 41 in (1040mm)
Overall Length: 40 in (1015mm)
Wing Area: 325 sq in (21 sq dm)
Flying Weight: 28-34oz (795-965 g)
Motor Size: Park 480 Outrunner, Power 10 Outrunner, Six Series
Radio: 6-Channel or greater
Servos: 4 Sub-Micros
Trim Scheme Colors: UltraCote White (#870), Fluorecscent Blue (#896). Pearl Bright Yellow (#85200), and Fluorescent Violet (#899)
CG (center of gravity): 3-7/8 to 4-3/8 in (100 to 110mm) behind the leading edge
Prop Size: 11 x 7 Electric
Spinner Size: 1-3/4 in
Hardware Included: Yes
Speed Control : 35A to 40A Brushless
Recommended Battery: 3-Cell 11.1V 1320mAh to 2100mAh Li-Po
Control Throw (Ailerons): 7/16 in (11mm) Low Rate or 7/8 in (22mm) High Rate
Control Throw (Elevator): 7/8 in (22mm) Low Rate or 2 in (50mm) High Rate
Control Throw (Rudder): 1-1/2 in (38mm) Low Rate or 2-1/2 in (63mm) High Rate
Approx. Flying Duration: 10 minutes
Approx. Assembly Time: 5-6 hours
*****YOU WILL NEED*****
-Channel Radio,
6-Ch Receiver,
40A Brushless ESC,
Brushless Motor
Propeller
11.1V 3-Cell Li-Po Battery
|
