| Features
Hand selected laser cut balsa Vacuum molded cowl Rudder and Elevator
Color peel-and-stick decals
Lightweight colored tissue
Full-size plan
Step-by-step instructions
Wire pushrod Servo Placement:
Mounted in rails on fuselage Landing Gear:
1/16" diameter wire front, tail wire skid requires bending.
Specifications
Length: 25" (635mm)
Wingspan: 35" (889mm)
Wing Area: 329sq.in. (22.74 sq dm)
Airfoil: Flat bottom
Center of Gravity (CG): 1-13/16"(46mm) back from the leading edge of the TOP wing
Control Throws
Elevator, Up and Down: 5/8" (11mm)
Rudder, Left and Right: 3/4" (20mm)
*****YOU WILL NEED*****
GWS IPS motor with "A" ratio gear drive
GWS-G2023
3 channel radio system (minimum)
3 micro servos
5A ESC w/BEC GWS-M2059
2 cell 700mAh LiPo battery
GWS 8x6 prop, GWS-Q2017
Building and field equipment
|
