| Features
Construction: Hand selected laser cut balsa
Vacuum molded nose bowl
Rudder Control: Pull-pull cables
Elevator Control: Wire pushrod
Servo Placement: Mounted in rails on fuselage
Landing Gear: 1/16" diameter wire front, .041 diameter wire rear,
requires bending
Specifications
Length: 27" (686mm)
Wingspan: 40" (1016mm)
Wing Area: 272 sq.in. (17.57 sq dm)
Airfoil: Flat bottom, high wing placement
Center of Gravity (CG): 2.5" (63mm) back from the leading edge of the
wing at the fuselage side
Elevator, Up and Down: 9/16" (14mm)
Rudder, Left and Right: 15/16" (23.5mm)
*****YOU WILL NEED*****
GWS IPS (indoor power system) motor with "A" ratio gear drive
3 channel radio system (minimum)
3 micro servos
5 amp ESC w/BEC
2 cell 700mAh LiPo battery
GWS 9x7 prop
Building and field equipment
|
