E Flite Extra 260 3D, 480

hobby shop online hobbies store
hobby shop online hobbies store
Home
--RC Airplanes
---ARF Electric
------E Flite

 
 
E Flite EFL-2475

E Flite
Extra 260
3D, 480

Item Number EFL-2475
RC Airplanes
ARF Electric

Retail $209.99
Our Price $149.99 That's 29% OFF

Available usually
ships out in 2 days

Overview
The Extra 260 3D 480 ARF is one of the first E-flite® planes to use a new construction technique that eliminates unnecessary weight without sacrificing any strength. This super-lightweight construction, combined with its generous wing area, results in exceptionally light wing loading. Plus, its firewall is designed to accept E-flite’s powerful Park 480 Brushless Outrunner Motor, without modification. It all comes together to give you a fantastic flying 3D airplane without limits and with nothing but possibilities.

Features
Generous wing area for lighter wing loading
Large control surfaces for precise control in high-alpha flight
Exceptionally lightweight balsa and plywood construction
Designed for use with E-flite’s Park 480 Brushless Outrunner Motor
Factory-painted fiberglass cowl and wheel pants
Aluminum landing gear and steerable tail wheel
Plug-in wings for easy transport
Assembles in just a few evenings
Covered in genuine UltraCote® and UltraCote Lite
Specifications
Wing Span: 43 in (1090mm) Overall Length: 40 in (1015mm) Wing Area: 375 sq in (24.2 sq dm) Flying Weight: 26–29 oz (740–820 g) Motor Size: Park 480 BL Outrunner Radio: 6 channels or more for proper mixing Servos: Sub-micro (4) Trim Scheme Colors: Pearl Purple (HANU847), Bright Yellow (HANU872), Silver (HANU881), Lite Transparent Clear (HANU964), Lite White (HANU973) CG (center of gravity): 3 inches (75mm) to 3 1/8 inches (79mm) Prop Size: 12x6 Electric Spinner Size: 1 3/4 in Hardware Included: Yes Speed Control : 35A-40A Brushless Recommended Battery: 1320-2100mAh 11.1V 3-cell Li-Po Control Throw (Ailerons): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm) Control Throw (Elevator): Low 3/4-inch (19mm) or High 1-1/2-inch (38mm) Control Throw (Rudder): Low 1-1/2-inch (38mm) or High 2-1/2-inch (64mm) Scale: Park Flyer Approx. Assembly Time: 4-6 hours *****You Will Need*****
You will need... 6-channel transmitter (for proper mixing and dual rate capabilities)
Micro receiver
4 sub-micro servos
Park 480 BL Outrunner Motor
40A Brushless ESC
12x6 Electric
Battery & Charger

More E Flite RC Airplanes ARF Electric

E Flite Extra 260 3D, 480
Copyright 2000 - 2011, Go Hobbies, Inc. all rights reserved
www.gohobbies.com last revised on February 9, 2012, 12:42 pm